Specifying mandolin upfront would have helped.
Sent from my iPhone using Tapatalk Pro
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Tone Wood Suppliers http://www-.luthiersforum.com/forum/viewtopic.php?f=10128&t=54320 |
Page 1 of 1 |
| Author: | Mike OMelia [ Sat Aug 14, 2021 10:28 am ] |
| Post subject: | Tone Wood Suppliers |
Need reputable suppliers for B&S sets, necks, fret board, peghead veneer. Thanks! |
|
| Author: | Pmaj7 [ Sat Aug 14, 2021 10:35 am ] |
| Post subject: | Re: Tone Wood Suppliers |
Besides the usual suspects? Are you looking for more of a wholesale? Pat |
|
| Author: | bcombs510 [ Sat Aug 14, 2021 6:43 pm ] |
| Post subject: | Re: Tone Wood Suppliers |
Allied has a site for uke specific sets: https://www.areukekiddingme.com/shop I have bought a few sets from them. Hibdon has good stuff usually - https://www.hibdonhardwood.com/collecti ... -side-sets Brad Sent from my iPhone using Tapatalk Pro |
|
| Author: | Mike OMelia [ Sun Aug 15, 2021 8:50 am ] |
| Post subject: | Re: Tone Wood Suppliers |
Hibdon does not supply Mandolin sets |
|
| Author: | bcombs510 [ Sun Aug 15, 2021 2:51 pm ] |
| Post subject: | Re: Tone Wood Suppliers |
Specifying mandolin upfront would have helped. Sent from my iPhone using Tapatalk Pro |
|
| Author: | A.Hix [ Sun Aug 15, 2021 9:08 pm ] |
| Post subject: | Re: Tone Wood Suppliers |
Hi Mike, I'll be happy to help. |
|
| Author: | Mike OMelia [ Fri Aug 20, 2021 8:43 am ] |
| Post subject: | Re: Tone Wood Suppliers |
bcombs510 wrote: Specifying mandolin upfront would have helped. Sent from my iPhone using Tapatalk Pro Well, this is the mandolin forum... |
|
| Author: | Mike OMelia [ Fri Aug 20, 2021 8:44 am ] |
| Post subject: | Re: Tone Wood Suppliers |
A.Hix wrote: Hi Mike, I'll be happy to help. I already have tops. These are for mandolins. Carved top and back. Message me if you can help Mike |
|
| Author: | A.Hix [ Fri Aug 20, 2021 9:06 am ] |
| Post subject: | Re: Tone Wood Suppliers |
Mike, I have a very large inventory of mandolin size back and side sets, in many wood species, as well as neck blanks, spruce tops, brace wood, peghead veneers, bridge blanks, fretboards, etc.. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|